Catalog
for blocking and removing the variator and clutch bellintegrated hex wrench for loosening the coupling nut, 34 mm, pin pitch: 55 mmmade of corrosion-resistant stainless steelto be used as OEM 14569-PIsuitable for many models of following manufacturers: Aprilia, Derbi, Gilera, Italjet, Peugeot, Piaggio, Vespa
suitable for painting car and machine parts maximum working pressure: 4.8 bar recommended operating pressure: 1.4 - 3.45 bar aluminium housing compressed air connection 6.3 mm (1/4") includes the following tools: 1 HLVP spray gun for painting small surfaces cup size 125 ml, nozzle size 0.8 mm, weight 230 g 1 HLVP spray gun for painting large surfaces cup...
Alternator Cover Puller | for Ducati
for holding the alternator drive flange & the crankshaft split gear suitable for BMW K models to be used as OEM 124600
Axle Nut Sockets | for Ducati | 8 pcs.
Bit and Socket Set | 10 mm (3/8") | T-Star (for Torx) | 34 pcs.
Bit and Socket Set | E-Type / T-Star (for Torx) | 17 pcs.
Bit and Socket Set | E-Type / T-Star (for Torx) | 30 pcs.
Bit Set | for Motorcycles | Internal Hexagon | 17 - 24 mm
Bit Socket Set | 12.5 mm (1/2") Drive | internal Hexagon 5 - 22 mm | 12 pcs.
Bit Socket Set | 12.5 mm (1/2") Drive | internal Hexagon 7/32" - 13/16" | Inch Sizes | 11 pcs.
Bit Socket Set | 6.3 mm (1/4") Drive | internal Hexagon 3/32" - 3/8" | Inch Sizes | 9 pcs.
Bit Socket | 12.5 mm (1/2") | internal Hexagon 14 mm
Bit Socket | 12.5 mm (1/2") | internal Hexagon 16 mm
Bit Socket | 12.5 mm (1/2") | internal Hexagon 17 mm
Bit Socket | 12.5 mm (1/2") | internal Hexagon 18 mm
Bit Socket | 12.5 mm (1/2") | internal Hexagon 19 mm
for easy and accurate maintenance of all cables good lubrication of bowden cables increases cable life
allows a bleeding of brake and clutch systems on motorcycles magnet for attachment to the frame includes 3 adaptors
for removing the brake pistons suitable for scooters, quads and motorcycles knurled jaws for better grip suitable for piston inside diameter 17 - 40 mm
suitable for nearly all brands for piston diameter 19 to 30 mm allows easy disassembly of brake pistons especially suitable for deeply stuck brake pistons
Camshaft Locking Tool | for Ducati (Testastretta)
Camshaft Locking Tool | for Ducati 4-Valve engines
Camshaft Locking Tool | for Ducati 851, 888, 916, 996
is needed when loosening the central screw of the camshaft wheelsuitable for Ducati Diavel (Carbon), Monster, Multistrada, Streetfighter and Superbikeincludes two locking tools
for removing the camshaft wheel suitable for following Ducati models: Hypermotard, Monster, Multistrada, Sportclassic, Sporttouring, Streetfighter, Superbike, Supersport MH900E, Diavel (Carbon)
for turning the eccentric hub and adjusting the chain tensionsuitable for Ducati 1098, 1198, SF, MTS 1200 und Diavel
for turning the eccentric hub and adjusting the chain tensionsuitable for Ducati 748, 916, 996, 998, Hypermotard, Multistrada, Monster S2R/S4R and all models with single sided swing-arm (not for 1098)
for turning the eccentric hub and adjusting the chain tensionsuitable for newer Triumph models with eccentric adjuster and single sided swing-arm
U-shaped brush allows easy drain cleaning refular cleaning extends the life of the chain
to separate motorcycle O-Ring, X-Ring and conventional chains
to separate motorcycle O-ring, X-ring and conventional chains
for loosening clutch baskets, chain sprockets, etc. holding pins (Ø 8 mm x 10 mm length) and 37 mm retaining legs max. opening: 125 mm locking pliers mechanism
Clutch Basket Holding Tool | for Ducati | Steel Version
pins engage in the clutch driver grooves and arrests it so that the central nut can be loosened securelypin diameter: 5 and 9 mm
Clutch Disc Centering Tool | for BMW Motorcycles R and K 1200
Clutch Disc Centering Tool | for BMW Motorcycles R and K Series
Clutch Disc Centering Tool | for BMW Motorcycles | 2-Valve engines
Combination Spanner Set | 6 - 32 mm | 25 pcs.
Combination Spanner Set | extra short | 10 - 19 mm | 10 pcs.
Combination Spanner Set | Inch Sizes | 1/4" - 1.1/4" | 25 pcs. cold forged ring head 15° angled profile ring side: 12-point packed in a tetron wallet
Combination Spanner Set | Inch Sizes | 1/4" - 15/16" | 12 pcs.
Gross weight: 250 gPackaging suitable for wall hanging: YesCE Standard: Yes
Double Open End Spanner Set | 6x7 - 30x32 mm | 12 pcs.
Flywheel Puller | for KTM, Suzuki, Yamaha
suitable for Yamaha WR 250F/WR400F and Kawasaki Jet Ski 300/440/550facilitates damage-free removal of the fly wheel3X 8 mm screws on a 55 mm round base are connected to the flywheel14 mm pressure spindle with sliding T-handleincl. 3 screws M8 x 40 mm
Gross weight: 50 gPackaging suitable for wall hanging: YesLength: 1 mMaterial: PlasticColour: White
Gross weight: 100 gPackaging suitable for wall hanging: YesLength: 2 mMaterial: PlasticColour: White
