Select your motorbike

SpeedoHealer V4 2WA Healtech

Reference HT-SH-V4-2WA

Read reviews (0)

Increase the accuracy of your motorbike speedo with the Healtech Boîtier V4 2 WA speedometer. It corrects your speedo display, records and displays the maximum speed you've reached on demand. Ideal if you change the gear ratios on your chain kit.

This model is compatible with the SH-Y06 kit only.

61,00 € incl. VAT

Quantity

On order [0 in stock] Average shipping time: 24 days after placing your order

Wishlist

Description

Compatible with

The Healtech SpeedoHealer is the world's most popular and reliable speedo calibrator - recognised by thousands of satisfied customers worldwide.

This model of SpeedoHealer is suitable for vehicles fitted with a 2-wire inductive sensor. If you are unsure of compatibility, please contact us. This model is compatible with the SH-Y06 kit only.

Why use a speed calibrator?

For most motorbikes, the error of the original speedometer can be as high as 10%. So even a modest gear change can lower the speedometer by 15%.

Changing the sprockets will also result in a higher odometer reading, reducing the resale value of your bike for no good reason. The SpeedoHealer is an inexpensive, practical and very simple way of solving these problems.

The Healtech V4 2 WA SpeedoHealer is capable of correcting your speedo display, as well as recording and displaying your top speed on demand. It is ideal in the event of a change to your chain kit's gear ratios, which distorts your speedo's calculation by around 7% in km and km/h.

This tiny device can save you from a fine for speeding, for example...

Special features of the HEALTECH speed calibrator - V4 2 WA type housing

This SpeedoHealer model is suitable for vehicles fitted with a 2-wire inductive sensor:

- Model is compatible with the SH-Y06 kit only.
- Easy to program, review and update stored parameters.
- Wide calibration range: -99.9% to 999.9.9% in 0.1% steps, meaning the signal can be adjusted from 1/1000 to x100, in 0.001 steps. This range is effective even for the most radical changes and is also suitable for all kinds of custom applications.
- Dual memory: Store two independent calibration values and switch between speeds at the touch of a button.
- Display unit conversion: Switch from Km/h to MPH and vice versa at the touch of a button.
- Compact dimensions: Gauge: 50 x 30 x 17 mm (1.9 x 1.2 x 0.6 inch) / Weight: 38 g (1.34 oz)
- High-speed CPU: 32-bit processing ensures high accuracy and immediate response to input signal without lag.
- 100% weatherproof: Each unit is fully tested and guaranteed to work. All probes are protected against reverse voltage, short circuits and high-energy transients.