Select your motorbike
Your bike
Create an account or log in to be able to register your motorcycles and easily access the corresponding products.
Motul 300V Factory Line 10W50 1L 108586
Reference DP085
State of the art lubricant developed for Factory Teams but also for high performance production motorbikes, designed to offer maximum engine power and better clutch control with exceptional engine and gearbox protection in all types of operating conditions, even the most extreme.
Suitable for 4-stroke engines with or without integrated gearboxes and with or without wet clutch.
For original, modified and racing engines operating at very high temperatures and over a very wide range of engine speeds.
18,83 € incl. VAT
300V 4T Factory Line
10W-50
Competition Motorcycle Lubricant
100% Synthetic - ESTER Core® Technology
For motorbikes equipped with 4-stroke engines with or without integrated gearboxes and wet or dry clutch, racing engines operating at very high temperatures and over a wide range of revs
For motorcycles with 4-stroke engines with or without integrated gearboxes and wet or dry clutch, racing engines operating at very high temperatures and over a wide range of engine speeds
Speed bikes, MotoGP, Supersport, Superbike, off-road, Cross MX, ...
Other use : Quads
Performance of Motul 300V Factory Line Road Racing 10W50 1L
STANDARDS : Exceeds existing standards
Operation of oil bath clutches validated on JASO T903 test
E-TECHNOLOGY:
MOTUL has been developing ester-based high-performance lubricants for several decades.
This choice of esters combined with an optimum selection of other high-performance synthetic base oils and an innovative additive package working in perfect synergy forms E-technology.
This technology allows maximum engine power to be extracted without compromising on reliability and wear.
- Engine power gain of over 1.3% while maintaining wet clutch efficiency.
Maximum gearbox protection through innovative anti-wear additive technology: FZG test result = FLS>14: The FZG test (Forschungsstelle für Zahnrader und Getriebebau) evaluates the lubricating capacity and anti-wear protection of the fluid between two gears subjected to a variable torque. The lubricant is then rated according to its "Failure Load Stage" (FLS) ranging from FLS 1 (very poor result) to FLS 14 (outstanding result).
- Constant oil pressure under all operating conditions.
Motul 300V Factory Line 10W50 1L oil use advice
For optimal engine and clutch performance, avoid mixing with other synthetic or mineral oils.
Drainage interval: To be adapted according to use.
Properties of the oil Motul 300V Factory Line10W50 1L
Visual colour: amber
Viscosity grade SAE J 300 10W-50
Density at 20°C ASTM D1298 0.871
Viscosity at 40°C (104°F) ASTM D445 107.5 mm²/s
Viscosity at 100°C (212°F) ASTM D445 17.7 mm²/s
Viscosity index ASTM D2270 182.0
Pour point ASTM D97 -36.0 °C / -32.8 °F
TBN ASTM D2896 9.5 mg KOH/g
Flash point ASTM D92 218.0 °C / 424.4 °F
For your viscosity assignments we recommend for information: http://niveau-huile.com
This product is universal
- Download : Sécurité EN.pdf
- Download : sécurité DE.pdf
- Download : Sécurité FR.pdf
- Download : FICHE TECHNIQUE 300v 10W50 1L 108586.pdf
Reference | DP085 |
Manufacturer | Motul |
Products in the same category
-30%
Available [6 in stock]
-35%
Available [5 in stock]
-30%
Available [13 in stock]
-30%
Available [9 in stock]
-35%
Available [6 in stock]
-35%
Available [6 in stock]
-42%
Available [13 in stock]
-30%
Available [11 in stock]
-30%
Available [11 in stock]
-30%
Available [7 in stock]