Street right handlebar switch (Brembo Racing) Jetprime JP PLDB 008

Street right handlebar switch (with misaligned holes for Brembo Racing master cylinder) Jetprime JP PLDB 008, specific to the motorcycles listed as compatible. It is more robust and lighter than the original part, providing quick, intuitive and safe control of essential functions, without distracting the rider or changing their riding position.

The product is made in Italy.

Technical advantages of Jetprime handlebar switches

Each Jetprime switch is interchangeable with the original controls and can be fitted on the handlebar of any compatible motorcycle without major modification thanks to Plug & Play connectors. Some handlebar switches are available in different versions (PLD/PLDB), depending on the mounting holes of the brake master cylinder. This version with misaligned holes is compatible with a Brembo Racing master cylinder. The product is also available in a standard version. Check your braking system to choose the appropriate version.

On sporty or track-prepared motorcycles, the switches can also integrate racing controls such as launch control, pit limiter, shifter/blipper management or other electronic parameters.

Each control panel is built from 7075 aluminium alloy, CNC-machined and laser-engraved. The switches comply with IP67 standards, ensuring water resistance and 1 million fatigue resistance cycles.

Warning: Jetprime products are intended for sporty use.

How to install a Jetprime motorcycle switch? 

The Jetprime switch is Plug&Play, no modification is required on the motorcycle:

1. Make sure the ignition is switched off

2. Disconnect and remove the original switch (refer to the manufacturer's workshop manual)

3. Remove the mounting screws and the brake master cylinder bracket

4. Install the Jetprime handlebar switch onto the brake master cylinder using the supplied screws, then tighten to 10 Nm

5. Connect the wiring harness to the original connectors

Discover the Jetprime brand

Jetprime Ltd was founded in 2002 in Modena, Italy. The company specializes in the development of electronic power modules for motorcycles, ATVs and fuel-injected quads. Its best-known product is the Jetprime handlebar switch.

The company was created with the intention of offering a higher level of service and always staying at the forefront of a constantly evolving market, by providing modern products through continuous research and development, as well as optimization and updates of its products.