Select your motorbike
Your bike
HealTech PAIR system eliminator PSE-02
Reference HT-PSE-02
HealTech electronic eliminator PSE-02 that prevents the FI warning light from coming on when you remove or disconnect the PAIR system from your motorcycle.
Track use only!
24,00 € incl. VAT
On order [0 in stock] Average shipping time: 9 days after placing your order
The HealTech PAIR system eliminator PSE-02 prevents the FI warning light from coming on when you remove the PAIR system from the motorcycle.
What is a PAIR system eliminator used for?
The PAIR system (Secondary Air Injection), fitted to most modern sport bikes and roadsters, injects fresh air downstream of the valves directly into the exhaust system. The goal is to promote after-oxidation of unburnt hydrocarbons, reduce emissions, and meet emissions regulations. However, it has a well-known side effect: when you close the throttle and under heavy deceleration, this air + unburnt fuel mixture ignites in the exhaust, causing popping and crackling on overrun.
As soon as you’re aiming for cleaner combustion, a sharper throttle response, eliminating “pops,” or a dyno tune, the PAIR system becomes a nuisance: it interferes with exhaust gas readings, skews measurements, and complicates optimization. But disconnecting the PAIR valve from the stock wiring harness is immediately detected by the ECU, which triggers the FI warning light and can mask a real engine-related fault.
The PSE Eliminator provides a clean, technical solution. The electronic module plugs into the PAIR valve connector and simulates the load expected by the ECU, preventing the FI light from appearing without any wiring modifications.
This removes the electronic constraint and lets you prepare the bike properly, whether for track use or precise tuning.
Technical specifications of a HealTech PAIR system eliminator
The HealTech electronic PAIR system eliminator prevents the FI warning light from coming on when you remove the PAIR system from the motorcycle. The module is supplied in a rugged, 100% weatherproof housing and comes with a 2-year replacement warranty.
Installation couldn’t be easier: no cutting or splicing required—just plug it in and it’s ready to go!
This electronic accessory is intended for track use only!
| HONDA | CBR 1100 XX | 1997 => 1998 |
| HONDA | CBR 1100 XX | 1999 => 2007 |
| KAWASAKI | KLV 1000 | 2004 => 2005 |
| KAWASAKI | VERSYS-X 300 | 2017 => 2020 |
| KAWASAKI | VERSYS 1000 | 2012 => 2014 |
| KAWASAKI | VERSYS 1000 | 2015 => 2018 |
| KAWASAKI | VERSYS 1000 | 2019 => 2020 |
| KTM | 690 DUKE | 2012 => 2015 |
| KTM | 950 LC8 SUPERMOTO R | 2005 => 2007 |
| KTM | 990 ADVENTURE | 2009 => 2012 |
| KTM | 1090 SUPER ADVENTURE T | 2017 => 2017 |
| KTM | 1290 SUPER ADVENTURE | 2015 => 2016 |
| KTM | 1290 SUPER ADVENTURE S | 2017 => 2020 |
| KTM | RC8 | 2008 => 2010 |
| KTM | SUPERDUKE 990 R | 2007 => 2013 |
| KTM | SUPER DUKE 1290 GT | 2016 => 2018 |
| KTM | SUPER DUKE 1290 GT | 2019 => 2021 |
| KTM | SUPER DUKE 1290 GT | 2022 => 2024 |
| KTM | SUPER DUKE 1290 R | 2017 => 2019 |
| KTM | SUPER DUKE 1290 R | 2020 => 2023 |
| KTM | SUPER DUKE 1290 R EVO | 2022 => 2023 |
| SUZUKI | GSX 1300 R HAYABUSA | 1999 => 2007 |
| SUZUKI | SVS 1000 | 2003 => 2007 |
| SUZUKI | V-STROM 1000 | 2002 => 2010 |
| SUZUKI | V-STROM 1000 | 2014 => 2016 |
| SUZUKI | VL 800 VOLUSIA | 2001 => 2007 |
| YAMAHA | FZ1 1000 Fazer | 2006 => 2015 |
| YAMAHA | MT-10 | 2016 => 2020 |
| YAMAHA | MT-10 | 2022 => 2025 |
| YAMAHA | YZF R1 | 2004 => 2005 |
| YAMAHA | YZF R1 | 2006 => 2006 |
| YAMAHA | YZF R1 | 2009 => 2011 |
| YAMAHA | YZF R1 | 2012 => 2014 |
| YAMAHA | YZF R1 | 2015 => 2019 |
| YAMAHA | YZF R1 | 2020 => 2024 |
| YAMAHA | YZF R1 M | 2015 => 2019 |
| YAMAHA | YZF R1 M | 2020 => 2024 |
Products in the same category
-12%
On order [0 in stock]
On order [0 in stock]
Available [1 in stock]
On order [0 in stock]
On order [0 in stock]
On order [0 in stock]
On order [0 in stock]
Available [1 in stock]
On order [0 in stock]
On order [0 in stock]
