Swift 9720 neoprene aerosol collar 500ml - Quick and easy to glue

New Swift 9720 neoprene aerosol collar 500ml - Quick and easy to glue View larger

Neoprene Spray Adhesive - The Alternative to Brush Application!

For all your delicate operations requiring a basic gluing for a better application, this neoprene glue will allow you a rapid initial adhesion between all kinds of materials: synthetic foams, burlap, felt, textiles, insulating materials, polystyrene foam, leather, leather synthetic, many plastics and plastic films, paper, cardboard etc. (not suitable for plasticized PVC).

Working time on one side: from 30 secs to 1 min 30
Working time on two sides: from 1 to 15 minutes depending on the materials
Thermal resistance: max 60 ° C depending on the applied voltages.

With swift®col 9720 Spray Adhesive you can work effortlessly and cleanly.

Manual downloadable at any time on this page.

More details

Out of stock

Sent the 25/01/2021, Delivered on 01/02/2021

I074*9720.500

12,49 € tax excl.

Pay in 3x toll from 150 €

Data sheet

Notice Swift 9720 Download (99.77k)

Ce produit est universel.

More info

Swift®col 9720 is an aerosol adhesive suitable for bonding different and / or similar materials. This relates to the following materials: foam materials, jute, felt, textiles, insulation materials, polystyrene foam, leather, synthetic leather, various plastics and plastic sheets, paper, cardboard, chipboard, etc.

The Swift®col 9720 provides the following benefits:

     for unilateral contact and adhesion
     fast initial enrollment
     same layer
     little smell
     transparent
     CFC-free, fluorinated and chlorinated hydrocarbons


Application :

With swift®col 9720 Spray Adhesive you can work effortlessly and cleanly.
Shake well before use
The width of the jet can be obtained with a special nozzle.
Press firmly on the top of the nozzle and apply the adhesive in an even layer. The application distance should be between 15 to 20 cm
Depending on bonding requirements, the adhesive can be applied on one side or on two sides for contact bonding. The surfaces to be bonded are coated on one side with the aerosol adhesive and are then brought into contact and taped after 30 seconds.
For bonding under high pressure, apply the adhesive on both sides, let dry for about 1 minute then display and press
Working time on one side: from 30 secs to 1 min 30
Working time on two sides: from 1 to 15 minutes depending on the materials
Thermal resistance: max 60 ° C depending on the applied voltages

30 other products in the same category:

dispo vente : 1