400ml Water Spray paint Ducati Anniversary Red 1100 Panigale V4 2018-2019

400ml Water Spray paint Ducati Anniversary Red  View larger

400 ml water spray paint

High quality acrylic paint to varnish

Easy application

Thanks to a professional quality sprayer, it can also be used on large surfaces

Extremely strong pigmentation and special additives ensure high hiding power.

Drying (at 20 ° C, 50% relative humidity):

Dust free: after 10 minutes

Dry to the touch: after 30 minutes

The drying time depends on the ambient temperature, the relative humidity and the thickness of the applied layer

More details

In stock

Sent 22/01/2020, Delivered on 27/01/2020

PDF2B-Spray400

100 Items available

24,92 € tax excl.

Pay in 3x toll from 150 €

Data sheet

PaintingAerosol
Bi-couche (base+vernis)Tri-Couches (sous-couche/base/vernis)
ModelRed
MakerDucati

This product is compatible with :

DUCATI1100PANIGALE V42019
DUCATI1100PANIGALE V42018

More info

TECHNICAL DATABASE BASED ON WATER

Description: Tintometric system made with acrylic resins APEO free, designed for car refinishing, composed of 65 base colors: 35 opaque bases, 7 aluminum bases, 4 graphite, 15 nacres, 4 xirallic and 3 auxiliaries.

Mixing: Before using the different bases, shake to mix the product, especially the aluminum bases. Once weighed the individual components of the hue, mix immediately.

Always filter the product with a 125 micron filter.

Note: Prepare the support with dry abrasive paper P600 or with wet P1000 paper, then degrease with an anti-silicone degreaser.

Application :

HVLP gun - nozzle 1,3-1,4

Pressure: 2 / 2,5 bar

Operating temperature: not less than 18 ° C

Application of metallic and pearlescent hues

1. Apply an anchoring veil and allow to dry until completely opaque.2 Apply a second full coat (for non-covering colors apply a third coat). Between the two layers allow to dry until completely opaque.

3. Apply a final layer of metallization with the same pressure but increasing the distance between the gun and the support.

Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.

Applying opaque hues

1. Apply a first coat and allow to dry until completely opaque

2. Apply a second coat to achieve complete coverage. In the case of hints of poor coverage, apply a third coat.

Always wait for opacification between successive layers.

Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.

Drying at 20 ° C / 40% humidity, 5 min for the anchor layer and 10 min the second layer.

Sanding: To eliminate any surface defects, sand with dry abrasive P1000 or higher after complete drying of the paint and repeat the proper painting cycle.

Varnish: Min. Time for application of varnish 15 minutes, maximum time 72 hours

Conservation: all shades kept in good conditions can be used within 3 months of their preparation

Theoretical yield: 3-4m² / kg of PAE product

CAUTION: KEEP OUT OF FREEZE. Store at temperatures above 15 ° C.

art this day

Accessories

30 other products in the same category:

dispo vente : 1