Select your motorbike
Your bike
Create an account or log in to be able to register your motorcycles and easily access the corresponding products.
400ml Water Spray paint Crystal White Pearl KTM 990 Supermoto R 2009-2012
Reference KTM-WhP1-Spray
400 ml water spray paint
High quality acrylic paint to varnish
Easy application
Thanks to a professional quality sprayer, it can also be used on large surfaces
Extremely strong pigmentation and special additives ensure high hiding power.
Drying (at 20 ° C, 50% relative humidity):
Dust free: after 10 minutes
Dry to the touch: after 30 minutes
The drying time depends on the ambient temperature, the relative humidity and the thickness of the applied layer
24,90 € incl. VAT
TECHNICAL DATABASE BASED ON WATER
Description: Tintometric system made with acrylic resins APEO free, designed for car refinishing, composed of 65 base colors: 35 opaque bases, 7 aluminum bases, 4 graphite, 15 nacres, 4 xirallic and 3 auxiliaries.
Mixing: Before using the different bases, shake to mix the product, especially the aluminum bases. Once weighed the individual components of the hue, mix immediately.
Always filter the product with a 125 micron filter.
Note: Prepare the support with dry abrasive paper P600 or with wet P1000 paper, then degrease with an anti-silicone degreaser.
Application :
HVLP gun - nozzle 1,3-1,4
Pressure: 2 / 2,5 bar
Operating temperature: not less than 18 ° C
Application of metallic and pearlescent hues
1. Apply an anchoring veil and allow to dry until completely opaque.2 Apply a second full coat (for non-covering colors apply a third coat). Between the two layers allow to dry until completely opaque.
3. Apply a final layer of metallization with the same pressure but increasing the distance between the gun and the support.
Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.
Applying opaque hues
1. Apply a first coat and allow to dry until completely opaque
2. Apply a second coat to achieve complete coverage. In the case of hints of poor coverage, apply a third coat.
Always wait for opacification between successive layers.
Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.
Drying at 20 ° C / 40% humidity, 5 min for the anchor layer and 10 min the second layer.
Sanding: To eliminate any surface defects, sand with dry abrasive P1000 or higher after complete drying of the paint and repeat the proper painting cycle.
Varnish: Min. Time for application of varnish 15 minutes, maximum time 72 hours
Conservation: all shades kept in good conditions can be used within 3 months of their preparation
Theoretical yield: 3-4m² / kg of PAE product
CAUTION: KEEP OUT OF FREEZE. Store at temperatures above 15 ° C.
art this day
This product is comptable with:
KTM | 990 SUPERMOTO | 2008 => 2010 |
Reference | KTM-WhP1-Spray |
Manufacturer | Moto Vision |
Painting | Aerosol |
Related Products
Products in the same category
Available [100 in stock]
Available [100 in stock]
Available [92 in stock]
Available [97 in stock]
Available [100 in stock]
Available [100 in stock]
Available [100 in stock]
Available [100 in stock]
Available [100 in stock]
Available [100 in stock]