400ml Water Spray paint Honda Accurate Silver CBR1000XX

400ml Water Spray paint Honda Accurate Silver CBR1000XX View larger

400 ml water spray paint

High quality acrylic paint to varnish

Easy application

Thanks to a professional quality sprayer, it can also be used on large surfaces

Extremely strong pigmentation and special additives ensure high hiding power.

Drying (at 20 ° C, 50% relative humidity):

Dust free: after 10 minutes

Dry to the touch: after 30 minutes

The drying time depends on the ambient temperature, the relative humidity and the thickness of the applied layer

More details

In stock

Sent 30/01/2020, Delivered on 04/02/2020

NH146M-Spray400

100 Items available

16,58 € tax excl.

Pay in 3x toll from 150 €

Data sheet

PaintingAerosol
ModelRed Gray Black, Black grey
MakerHonda

This product is compatible with :

HONDA1100CBR XX1997
HONDA1100CBR XX1998
HONDA1100CBR XX1999
HONDA1100CBR XX2000
HONDA1100CBR XX2001
HONDA1100CBR XX2002
HONDA1100CBR XX2003
HONDA1100CBR XX2004
HONDA1100CBR XX2005
HONDA1100CBR XX2006
HONDA1100CBR XX2007
HONDA1100CBR XX2008

More info

TECHNICAL DATABASE BASED ON WATER

Description: Tintometric system made with acrylic resins APEO free, designed for car refinishing, composed of 65 base colors: 35 opaque bases, 7 aluminum bases, 4 graphite, 15 nacres, 4 xirallic and 3 auxiliaries.

Mixing: Before using the different bases, shake to mix the product, especially the aluminum bases. Once weighed the individual components of the hue, mix immediately.

Always filter the product with a 125 micron filter.

Note: Prepare the support with dry abrasive paper P600 or with wet P1000 paper, then degrease with an anti-silicone degreaser.

Application :

HVLP gun - nozzle 1,3-1,4

Pressure: 2 / 2,5 bar

Operating temperature: not less than 18 ° C

Application of metallic and pearlescent hues

1. Apply an anchoring veil and allow to dry until completely opaque.2 Apply a second full coat (for non-covering colors apply a third coat). Between the two layers allow to dry until completely opaque.

3. Apply a final layer of metallization with the same pressure but increasing the distance between the gun and the support.

Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.

Applying opaque hues

1. Apply a first coat and allow to dry until completely opaque

2. Apply a second coat to achieve complete coverage. In the case of hints of poor coverage, apply a third coat.

Always wait for opacification between successive layers.

Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.

Drying at 20 ° C / 40% humidity, 5 min for the anchor layer and 10 min the second layer.

Sanding: To eliminate any surface defects, sand with dry abrasive P1000 or higher after complete drying of the paint and repeat the proper painting cycle.

Varnish: Min. Time for application of varnish 15 minutes, maximum time 72 hours

Conservation: all shades kept in good conditions can be used within 3 months of their preparation

Theoretical yield: 3-4m² / kg of PAE product

CAUTION: KEEP OUT OF FREEZE. Store at temperatures above 15 ° C.

art this day

Accessories

30 other products in the same category:

dispo vente : 1