Motogadget Turn signal unit M.Flash

New Reduced price! Motogadget Turn signal unit M.Flash View larger

The most compact load independent flasher relay on the market!

Motogadget did it for you ...

Case: L x W x H 18 mm x 13 mm x 9.5 mm
Connection cable length: about 2 x 50mm

More details

Out of stock

Sent the 06/10/2020, Delivered on 13/10/2020

4000010

23,42 € tax excl.

-6%

Instead of24,92 € tax excl.

Pay in 3x toll from 150 €

Ce produit est universel.

More info

The mo.flash is by far the most compact load independent flasher relay on the market. Nothing comes close in size and simplicity. The mo.flash flasher unit substitutes all conventional flasher relays. 


Attention: If you are looking for a flasher relay with automatic deactivation please refer to our mo.stop series.

Advantages

  • Ultra compact and light - in essence just a piece of cable attached to a tiny, candy-sized device  
  • Ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
  • The wiring can be placed into the handle bar or frame tubes or into the wiring harness
  • Almost load independent (min. 1 Watt)
  • Completely implemented using digital semiconductor technology. microprocessor controlled No mechanical workings, no spools, no electric contacts
  • Consistantly constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights
  • e. g. works with 4 turn signal lights or 2 handle bar end turn signal lights
  • Immediate loss free and brighter illumination of all turn signal lights
  • Utterly hassle-free connection using only two cables - just connect in series
  • Completely water tight and vibration resistant because of the moulded-in construction
  • Short circuit proof, automatic overload protection, switches power up to 100 W.
  • No heat generation while operating
  • Only 5 - 18 V operating voltage required
  • Also applicable for 6 V turn signal lights
  • Quality 'made in Germany' - by motogadget

Notes

The mo.flash substitutes a conventional flasher relay. This flasher relay usually is implemented BEFORE the indicator switch. The most convenient way to mount the mo.flash is to simply search and replace the original relay.

The mo.flash can NOT replace the push-button controls. Please refer to our mo.relay+ if you are looking for a flasher relay for push-buttons.

Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM). These modules can NOT be replaced or complemented by the mo.flash.

Specifications and features

Casing L x W x H18 mm x 13 mm x 9,5 mm
Connector cable lengthapprox. 2 x 50 mm
Weightapprox. 4 g

30 other products in the same category:

dispo vente : 1