Select your motorbike

Motorcycle paint KTM Crystal White Pearl KTM EXC 150 200 300 2002-2016

Reference KTM-WhP1

Motorcycle paint based on water

High hiding power.

Ready to use, already diluted.

We create the colors directly in our laboratory according to your needs the color code that you want.

If you do not find your color do not hesitate to contact our team who can inform you at (0033)3-88-09-29-31

Voir la fiche complète
Compatible with
Technical sheet
Reviews 0


Description: Tintometric system made with acrylic resins APEO free, designed for car refinishing, composed of 65 base colors: 35 opaque bases, 7 aluminum bases, 4 graphite, 15 nacres, 4 xirallic and 3 auxiliaries.

Mixing: Before using the different bases, shake to mix the product, especially the aluminum bases. Once weighed the individual components of the hue, mix immediately.

Always filter the product with a 125 micron filter.

Note: Prepare the support with dry abrasive paper P600 or with wet P1000 paper, then degrease with an anti-silicone degreaser.

Application :

HVLP gun - nozzle 1,3-1,4

Pressure: 2 / 2,5 bar

Operating temperature: not less than 18 ° C

Application of metallic and pearlescent hues

1. Apply an anchoring veil and allow to dry until completely opaque.2 Apply a second full coat (for non-covering colors apply a third coat). Between the two layers allow to dry until completely opaque.

3. Apply a final layer of metallization with the same pressure but increasing the distance between the gun and the support.

Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.

Applying opaque hues

1. Apply a first coat and allow to dry until completely opaque

2. Apply a second coat to achieve complete coverage. In the case of hints of poor coverage, apply a third coat.

Always wait for opacification between successive layers.

Note: To accelerate drying, it is advisable to use a venturi and to increase the temperature of application.

Drying at 20 ° C / 40% humidity, 5 min for the anchor layer and 10 min the second layer.

Sanding: To eliminate any surface defects, sand with dry abrasive P1000 or higher after complete drying of the paint and repeat the proper painting cycle.

Varnish: Min. Time for application of varnish 15 minutes, maximum time 72 hours

Conservation: all shades kept in good conditions can be used within 3 months of their preparation

Theoretical yield: 3-4m² / kg of PAE product

CAUTION: KEEP OUT OF FREEZE. Store at temperatures above 15 ° C.

art this day

This product is comptable with:

KTM 125 EXC 2012 => 2016
KTM 200 EXC 2012 => 2016
KTM 250 EXC 2012 => 2017
KTM 300 EXC 2012 => 2017
KTM 300 EXC TPI 2018 => 2020
KTM 350 EXC F 2012 => 2020
KTM 450 EXC 2012 => 2020
KTM 500 EXC 2012 => 2020
KTM 690 DUKE 2008 => 2011
KTM 690 DUKE 2012 => 2015
Reference KTM-WhP1
Manufacturer Moto Vision
Painting Liquid paint

Subscribe to our newsletter

Don't miss any more promotions!