Motul 300V Road Racing 4L 15W50

Uses of Motul 300V Factory Line Road Racing 15W50 4L

300V 4T Factory Line

15W-50

Lubricant for motorbike racing
100% Synthetic - Technology E

Competition motorbikes equipped with high performance 4-stroke engines with integrated or non-integrated gearboxes and oil bath or dry clutch, racing engines operating at very high temperatures and very high rotation speeds.
Particularly recommended for endurance engines.

Other uses: Road motorbikes equipped with catalytic converter, quads...
 

Performance of Motul 300V Factory Line Road Racing 15W50 4L

STANDARDS : Exceeds existing standards
Operation of oil bath clutches validated on JASO T903 test

E-TECHNOLOGY:
MOTUL has been developing ester-based high-performance lubricants for several decades.
This choice of esters combined with an optimum selection of other high-performance synthetic base oils and an innovative additive package working in perfect synergy forms E-technology.

This technology allows maximum engine power to be extracted without compromising on reliability and wear.

- Engine power gain of over 1.3% while maintaining wet clutch efficiency.

Maximum gearbox protection through innovative anti-wear additive technology: FZG test result = FLS>14: The FZG test (Forschungsstelle für Zahnrader und Getriebebau) evaluates the lubricating capacity and anti-wear protection of the fluid between two gears subjected to a variable torque. The lubricant is then rated according to its "Failure Load Stage" (FLS), ranging from FLS 1 (very poor result) to FLS 14 (outstanding result).

- Constant oil pressure under all operating conditions.

Motul 300V Factory Line Road Racing 15W50 4L oil use advice

For optimal engine and clutch performance, avoid mixing with other synthetic or mineral oils.
Drainage interval: To be adapted according to use.

Properties of the oil Motul 300V Factory Line Road Racing 15W50 4L

Colour Visual
Viscosity grade SAE J 300 Density at 20°C (68°F) ASTM D1298 Viscosity at 40°C (104°F) ASTM D445 Viscosity at 100°C (212°F) ASTM D445 Viscosity index ASTM D2270 Pour point ASTM D97 Flash point ASTM D92 TBN ASTM D2896

Yellow / Fluorescent Green

15W-50

0.878
117.4 mm2/s 17.0 mm2/s
167
-45°C / -49°F 238°C / 460.4°F 8.4 mg KOH/g

For your viscosity assignments we recommend for your information: http://niveau-huile.com