MO.Relay + Motogadget

The mo.relay + is a useful combination of a load-independent digital turn signal relay and an electronic control button.

How does the MO.Relay + Motogadget turn signal relay with push-button control work?

Depending on how long each turn signal push button is pressed, 4 modes are available:

1. Lane change: Briefly tap the button – the turn signal flashes 3 times, then switches off automatically.
2. Turning: Briefly press the button – the turn signal flashes 10 times, then switches off automatically.
3. Continuous flashing: Press and hold the button – switch off by pressing either button again.
4. In addition, the mo.relay+ features a hazard warning function when both buttons are pressed simultaneously.

The mo.relay+ is load-independent (1–100 W) and can operate almost all LED turn signals, micro turn signals, halogen turn signals and 10 W or 21 W incandescent bulbs with a constant flashing frequency.

Immediate, loss-free and brighter illumination of the turn signals is a result of the efficiency of microelectronics!

If you are looking for a turn signal relay WITHOUT a control button, please see mo.flash or mo.wave.

If you are looking for a turn signal relay WITHOUT a control button, with automatic shut-off, please see mo.stop.

If you are looking for a complete push-button control with many additional functions, please see mo.unit blue / basic.

Advantages of the MO.Relay + Motogadget turn signal relay with push-button control

• Very small and lightweight, easy to mount
• Ideal for custom motorcycles and conversions where space is limited – bulky standard turn signal relays and load resistors are a thing of the past.
• No additional push-button control required
• Intuitive programming and automatic shut-off
• Almost load-independent (min. 1 watt)
• Fully digital semiconductor technology. Microprocessor-controlled. No mechanical parts, coils or contacts
• Always constant and correct flashing frequency, making it suitable for almost all LED turn signals, all micro turn signals, halogen turn signals, 10 W turn signals and 21 W turn signals
• For example, works with 4 turn signals or 2 handlebar-end turn signals
• Instantaneous, loss-free and brighter illumination of the turn signals
• Completely waterproof and vibration-resistant thanks to fully moulded construction
• Short-circuit resistant with automatic overload protection. Switches up to 100 watts
• No heat generation during operation
• Operating voltage from 5 V to 18 V

Features of the MO.Relay + Motogadget turn signal relay with push-button control

• Diameter without cable: 19 mm
• Height: 19 mm
• Small and lightweight aluminium housing, black anodised
• Convenient M3 mounting thread
• Can also be mounted using cable ties
• Overload protection
• Electronics are completely waterproof and vibration-resistant