Flashing M.Blaze Ice Motogadget

For years, Moto Gadget has been synonymous with technical and innovative quality for the motorbike market. Its avant-garde design, functional products and impeccable finish make Motogadget the first choice when it comes to customisation.

Order two indicators for use as a pair, four for front and rear.

Motogadget M.Blaze Pin Flasher Features

The M.Blaze Ice from motogadget Cool as ice! The M.Blaze Ice is motogadget's special LED accessory.

A well-known add-on has been completely rethought, designed to be fascinating and technically sophisticated.

M.Blaze Ice appears through the clear glass body, which is made from a scratch-resistant plastic that is very neutral and inconspicuous. The small aluminium base is available in black anodised or polished aluminium. The flasher is suitable for all styles, all finishes and a wide range of motorbikes.

- Absolutely unique, new design and functional principle (TranzLight technology)
- Very neutral, lightweight appearance thanks to clear glass body
- State-of-the-art high-performance LED technology (IntensiLED)
- Electronic voltage conditioning and secure electronic protection
- Very bright light in the beam direction, good visible light on almost all sides

- Single left m.blaze ice mount with M8 thread
- Mother m8
- Connection cable approx. 100 cm long
- Installation instructions
- Speedometer sensor (M5 x 0.5 fine thread, stainless steel, IP 68) with 150 cm connection cable

- Total length with thread 83 mm
- Length without thread 65 mm
- Largest diameter 20.5 mm
- Cable length approx. 100 cm
- Weight approx. 15 g
- Mounting M8 threaded bolt
- Power consumption approx. 3 watts

Discover Motogadget indicators

For years, Moto Gadget has been synonymous with technical and innovative quality for the motorbike market. Its avant-garde design, functional products and impeccable finish make Motogadget the first choice for customisation.

Thanks to Motogadget's TranzLight-Technology® (TLT, patent pending), the transparent body of the flasher itself becomes a means of lighting. TranzLight-Technology® makes intelligent use of the total reflection of light waves. This progressive development approach is not limited to the simple miniaturisation of flasher housings; it shapes the light directly onto a crystalline glass body. Only precise optical CAD calculations and state-of-the-art manufacturing processes make this new design and its function possible.

The luminous flux required for the TranzLight principle is generated by the intensiLED® process developed by motogadget and consists of three important pillars:

- Specially selected high-performance LEDs with maximum efficiency and a total output of 3 W and a life of over 50,000 h, converted in line with our philosophy
- IC-controlled constant current source clocked at 330 kHz
- Special collimator optics, which precisely couple the wide-scattering LED light into the glass body

A major advantage of TranzLight technology is the increased safety provided by the improved visibility of the flashing signal. The light is emitted at an angle of almost 180° and is therefore visible from the front, rear and sides.

The fastening link is mechanically decoupled from the fastening wire by means of a flexible absorber and is therefore protected against vibration and mechanical effects. The flasher can be used like any conventional LED flasher with load resistors or any of our load-independent flasher relays (m.flash, m.wave, m.stop, m.relay +).