Speedo Healer Healtech V4

The Healtech speed calibrator is the world's most popular and reliable speed calibrator - recognised by thousands of satisfied customers worldwide.

This electronic speedometer and odometer calibrator with maximum speed memory is compatible with all motorbikes and ATV/UTVs that do not have a cable powered speedometer. All you have to do is order the plug and play harness compatible with your motorbike from our shop and you're ready to go.

Why use a speedometer?

For most motorbikes, the error of the original speedometer can be as high as 10%. So even a modest gear change can lower the speedometer by 15%.

Changing the sprockets will also result in a higher odometer reading, reducing the resale value of your bike for no good reason. The SpeedoHealer is an inexpensive, practical and very simple way of solving these problems.

The Healtech V4 SpeedoHealer is capable of correcting your speedo display, as well as recording and displaying your top speed on demand. It is ideal in the event of a change in your chain kit's gear ratios, which distorts your speedo's calculation by around 7% in km and km/h.

This tiny device could save you from a fine for speeding, for example...

Features of the HEALTECH speed calibrator - V4 type case

The Healtech speed calibrator, also known as SpeedoHealer, has the following features:

- Compatible with all motorbikes with wireless speedometers.
- Easy to program, review and update stored settings.
- Wide calibration range: -99.9% to 999.9.9% in 0.1% steps, meaning the signal can be adjusted from 1/1000 to x100, in 0.001 steps. This range is effective even for the most radical changes and is also suitable for all kinds of custom applications.
- Dual memory: Store two independent calibration values and switch between speeds at the touch of a button.
- Comes with a detachable remote button as standard for Top Speed Recall.
- Display unit conversion: Switch from Km/h to MPH and vice versa at the touch of a button.
- Compact dimensions: Calibre: 50 x 30 x 17 mm (1.9 x 1.2 x 0.6 inch) / Weight: 38 g (1.34 oz)
- 100% weatherproof: Each unit is fully tested, guaranteed to work. All probes are protected against reverse voltage, short circuits and high-energy transients.