Select your motorbike

Overflow Container 125/250 mL

Reference MV-1082

Read reviews (0)

Motorcycle fluid recovery bottle, mandatory for track riding. To be installed on the frame or on the poly fairing to prevent fluid loss on the track.

Available in two sizes: 125 or 250 mL.

Description

Compatible with

The 125 or 250 mL fluid recovery bottle is an essential accessory for riders focused on performance and safety. Designed for easy installation on the frame or the poly fairing, it collects fluids in the event of engine overheating, preventing them from spilling onto the track.

Made from HDPE (high-density polyethylene) with a rubber cap, this recovery bottle combines strength, lightness, and practicality, ensuring optimal performance both on the track and on the road.

Available in two sizes: 125 or 250 mL

FFM Regulations

Compliant with FFM and FIM* standards (subject to regulatory changes since 2024), this device protects riders from slippery surfaces. For full compliance, it is recommended to install two bottles: one for the radiator breather and one for the fuel tank breather (oil breather).

*Article 4 – Recovery Bottles
Machines must be equipped with oil breathers, which must discharge into a recovery bottle that is easily accessible and emptied before each start. The recovery bottle capacities must be 250 mL for gearbox breathers and 500 mL for the engine. Oil breathers must be connected and discharged into the airbox. Fuel tanks with breather tubes must discharge into a recovery bottle with a minimum capacity of 250 mL, including when a non-return valve is used. The recovery bottle must be made of an appropriate material. Radiator and carburetor breathers must discharge into 250 mL bottles made of suitable material.