Filling and emptying device 150ml

Reference SB-190012

Read reviews (2)

Hydraulic brake or clutch filling and bleeding: simple, fast, and clean with the Stahlbus vacuum fill and bleed device.

The transparent plastic allows you to see if there are still bubbles or if the job is complete. Used together with the Stahlbus bleed and drain valve, it provides a real time-saving advantage for maintaining your motorcycle.

16,08 € incl. VAT

Quantity

Available [2 in stock] Shipped on 12/12/25. , expected delivery date 12/16/25

Wishlist

Description

Compatible with

Reviews 2

Do you want to fill your hydraulic brake or clutch quickly, easily, and cleanly? Say goodbye to complicated bleeding procedures or expensive vacuum devices. Our Stahlbus fill and bleed device is a practical and economical solution for all motorcyclists.

How to use the Stahlbus fill and bleed device

It’s very simple to use: start by filling the compensation reservoir with hydraulic fluid. Then, use the vacuum bulb to draw the fluid directly into the brake or clutch system. Finally, perform the final bleed using the Stahlbus bleed screw, and you’re done! This ensures the last drop of fluid stays exactly where it should be – in the hose, without any waste or spillage.

The kit includes everything needed for a clean and efficient bleed:

A 50 ml vacuum bulb
A hose adapter
Approximately 30 cm of transparent silicone hose

With this device, you can now maintain your brakes and clutch alone, safely, and professionally. A simple solution that guarantees a fast, effective, and hassle-free bleed, extending the life of your hydraulic system.

Optimize your braking power by up to 30%

Did you know that an optimized brake bleed can increase your braking power by up to 30%?

The Stahlbus drain valve allows you to perform this operation alone, cleanly, and quickly, without a mechanic’s help. No more complicated bleeding or risk of air entering the hydraulic circuit – now you can maintain your brakes with confidence.

The patented Stahlbus technology features a two-part bleed valve with an integrated anti-return function. During bleeding, only the upper part of the valve, equipped with an O-ring, is loosened. This prevents air or hydraulic fluid from entering through the open thread. The anti-return valve ensures that opening and closing no longer rely on manual synchronization, reducing the risk of errors. In case of a pressure drop, the valve closes automatically, ensuring effective bleeding with every pump.