Select your motorbike
Your bike
Street Right Handlebar Switch (Aligned Holes) Jetprime JP PLD 002
Reference JP PLD 002
Street Right Handlebar Switch (Aligned Holes) Jetprime JP PLD 002 suitable for the motorcycles listed as compatible. The color variants share the same base product; only the color/finish changes.
Quick installation with a Plug and Play connector.
Switch intended for sporting use, on a closed circuit.
237,60 € incl. VAT
Street Right Handlebar Switch (Aligned Holes) Jetprime JP PLD 002, specific to the motorcycles listed as compatible. It is stronger and lighter than the original part, providing fast, intuitive and safe control of essential functions, without distracting the rider or changing their riding position.
The product is made in Italy.
Technical advantages of Jetprime handlebar switches
Each Jetprime handlebar switch is interchangeable with the original controls and can be fitted to the handlebar of any compatible motorcycle without major modification thanks to Plug & Play connectors. Some handlebar switches are available in different versions depending on the brake master cylinder mounting holes. Check your braking system to choose the appropriate version.
On sporty bikes or track-prepared motorcycles, handlebar switches can also integrate racing controls such as launch control, pit limiter, shifter/blipper management, or other electronic settings.
Each control panel is made from 7075 aluminum alloy, CNC-machined and laser-engraved. The switches comply with IP67 standards, ensuring water resistance and 1 million fatigue-resistance cycles.
Warning: Jetprime products are intended exclusively for sporting use on closed circuits.
How to install a Jetprime motorcycle handlebar switch?
The Jetprime handlebar switch is a Plug&Play product; no modification is required on the motorcycle:
1. Make sure the ignition is turned off
2. Disconnect and remove the original handlebar switch (refer to the manufacturer’s workshop manual)
3. Remove the fixing bolts and the bracket from the brake master cylinder
4. Install the Jetprime handlebar switch on the brake master cylinder using the provided bolts, then tighten to 10 Nm
5. Connect the wiring to the original connectors
Discover the Jetprime brand
Jetprime Ltd was founded in 2002 in Modena, Italy. The company specializes in the development of electronic power modules for motorcycles, ATVs and fuel-injected quads. Its best-known product is the Jetprime handlebar switch.
The company was created with the intention of providing a higher level of qualified service and always staying at the forefront of an ever-changing market, offering modern products thanks to continuous research and development, as well as the optimization and updating of its products.
| MV Agusta | BRUTALE 675 | 2012 => 2016 |
| MV Agusta | BRUTALE 800 | 2013 => 2016 |
| MV Agusta | BRUTALE 800 | 2017 => 2019 |
| MV Agusta | BRUTALE 920 | 2011 => 2012 |
| MV Agusta | BRUTALE 1000 | 2019 => 2020 |
| MV Agusta | BRUTALE 1090 | 2012 => 2018 |
| MV Agusta | DRAGSTER | 2014 => 2017 |
| MV Agusta | F3 | 2013 => 2026+ |
| MV Agusta | F3 675 | 2011 => 2020 |
| MV Agusta | F4 1000 R | 2010 => 2011 |
| MV Agusta | F4 1000 R | 2013 => 2019 |
| MV Agusta | F4 1000 RR | 2011 => 2012 |
| MV Agusta | F4 1000 RR | 2013 => 2019 |
| MV Agusta | RIVALE | 2013 => 2018 |
| Reference | JP PLD 002 |
| Manufacturer | Jetprime |
| Use | Route |
| Location | Right |
You may also like
On order [0 in stock]
On order [0 in stock]
On order [0 in stock]
On order [0 in stock]
On order [0 in stock]
Products in the same category
Available [4 in stock]
Available [4 in stock]
-10%
Available [1 in stock]
On order [0 in stock]
On order [0 in stock]
On order [0 in stock]
