Antigravel MS - NOVOL car body protector

Reference NV-34202

Read reviews (0)

Novol’s Antigravel MS is a bodywork protection product that creates a strong and flexible layer with a fine-grained texture, resistant to stone impacts. It protects your motorcycle against petrol, oils, water and salt. It also has sound-absorbing and sound-insulating properties.

Description

Compatible with

Technical sheet

Novol’s Antigravel MS forms a durable, very flexible and fine-grained layer that is resistant to stone impacts. It protects against petrol, oil, water and salt. It also has sound-absorbing and sound-insulating properties.

This product is based on synthetic resins, does not contain asphalt or bitumen, and can be coated with any acrylic paint. The product is equipped with a “FAN” nozzle that provides a spray pattern with application properties similar to those obtained with a conventional spray gun.

Warning! After use, clean the valve. To do this, turn the can upside down and spray for about 5 seconds until the valve is completely empty.

VOC limit II/B/e = 840 g/l — VOC < 580 g/l.

SHELF LIFE: 5 years at 20°C.

Instructions for use Novol’s Antigravel MS

Degrease the area
Sand the area with fine abrasive paper
Remove dust by degreasing the fairing again
Shake the product for 2 minutes
Apply 2–3 coats of Antigravel
Clean the valve for 5 seconds immediately after application
Let dry for 40–60 minutes at room temperature (20°C)

NOVOL body protection product creates a strong and flexible layer with a fine-grained structure, resistant to stone impact. It protects against petrol, oil, water and salt. It also has sound absorbing and sound deadening properties. It is a synthetic resin-based product that does not contain asphalt and bitumen and can be overlaid with any acrylic paint. The product is equipped with a "FAN" nozzle that provides a spray with similar application properties to those obtained with a conventional spray gun.

Caution! After use, clean the valve. To do this, reverse and spray for about 5 seconds until the valve is completely empty.

Our tips for using NOVOL body protection

Degrease

Sanding

Degreasing

Shake for 2 minutes

Apply 2-3 coats

5 ÷ 10 min

40-60 min/20°C

Clean the valve for 5 seconds