SpeedoHealer V4 AB Healtech

The Healtech speed calibrator is the world's most popular and reliable speed calibrator - recognised by thousands of satisfied customers worldwide.

The difference between the SpeedoHealer SH-V4 and the SH-V4-AB is that the standard model has a remote push button for maximum speed recall, while the AB model has a remote controller that allows INSTANT switching (even while driving) between the A and B memory banks. The SH-V4-AB unit is compatible with all SH-V4 harness kits. Mounting harnesses sold individually on Moto Vision.

Why use a speed calibrator?

For most motorbikes, the error in the original speedometer can be as high as 10%. So even a modest gear change can lower the speedometer by 15%.

Changing the sprockets will also result in a higher odometer reading, reducing the resale value of your bike for no good reason. The SpeedoHealer is an inexpensive, practical and very simple way of solving these problems.

The SpeedoHealer V4 Healtech is capable of not only correcting your odometer display, but also recording and displaying your top speed on demand. It is ideal in the event of a change in your chain kit's gearing, which distorts your speedo's calculation by around 7% in km and km/h.

This tiny device can save you from a fine for speeding, for example...

Features of the HEALTECH SpeedoHealer - V4 AB type case

The SpeedoHealer V4 AB has the following features:
- Compatible with all motorbikes with wireless speedometers.
- Easy to program, review and update stored parameters.
- Wide calibration range: -99.9% to 999.9.9% in 0.1% steps, which means the signal can be adjusted from 1/1000 to x100, in 0.001 steps. This range is effective even for the most radical changes and is also suitable for all kinds of custom applications.
- Dual memory: Store two independent calibration values and switch from one speed to the other at the touch of a button.
- Features a remote controller that allows INSTANT switching (even while driving) between memory banks A and B.
- Display unit conversion: Switch from Km/h to MPH and vice versa at the touch of a button.
- Compact dimensions: Gauge: 50 x 30 x 17 mm (1.9 x 1.2 x 0.6 inch) / Weight: 38 g (1.34 oz)
- High-speed CPU: 32-bit processing ensures high accuracy and immediate response to input signal without lag.
- 100% weatherproof: Each unit is fully tested and guaranteed to work. All probes are protected against reverse voltage, short circuits and high-energy transients.